OPTIMIX 2G 150-380
The submersible mixer has an output of 15.0 kW at 380 revolutions per minute. The agitator is equipped with a three-bladed HD+ agitator blade in V2A with a diameter of 660 mm.
The guide system for 100 x 100 mm masts features a 4-roller guide with POM glide bars and ensures that the OPTIMIX 2G 150-380 slides up and down the mast without any problems.
The submersible mixer is approved for explosion protection zone 2.
The scope of delivery includes a 10 m microbe-resistant cable, 10 m cable, cable clamps for cable guidance as well as the proven POM protective clamp to reduce abrasion on the agitator blade socket. The submersible mixer is supplied without control/switch.
The guide system for 100 x 100 mm masts features a 4-roller guide with POM glide bars and ensures that the OPTIMIX 2G 150-380 slides up and down the mast without any problems.
The submersible mixer is approved for explosion protection zone 2.
The scope of delivery includes a 10 m microbe-resistant cable, 10 m cable, cable clamps for cable guidance as well as the proven POM protective clamp to reduce abrasion on the agitator blade socket. The submersible mixer is supplied without control/switch.
| Application: |
Dry matter content up to 12 % |
| Motor: | Rated power: 15.0 kW Rated voltage: 400 V Rated Current: 29.1 A Frequency: 50 Hz Power factor cos φ: 0.83 Submersible motor IP 68, pressure-resistant 10 m PTC thermistor sensor as overheating protection Separate oil circuit, turbine oil |
| Gearbox: | Robust planetary gear Reduction i =3.83 / Agitator blade speed: 380 rpm Own oil circuit (0.75 ltr.), long-life gear oil Oil change interval after 4,000 operating hours |
| Cabel: | 10 m cable 7 x 4 + 4 x 1.5 mm2 , Ø 20 mm Crimped cable entry Microbe-resistant Integrated cable strain relief 800 N Cable clamps & 10 m rope included |
| Explosion protection: | Approved for explosion protection zone 2 ATEX classification ce II 3G Ex ec h IIA T3 Gc |
| Propeller: | Three-bladed and balanced for smooth running Blade HD+ 660in V2A Diameter of agitator blade: 660 mm |
| Guiding system:: | Motor mount with 4-roller guides for optimal gliding. For 100 x 100 mm masts, recommended max. mast height: 6 m |
| Bearing: | Bearing flange with mechanical seal SiC/SiC, max. level above agitator = 12 m, higher levels possible on request. 2 tapered roller bearings to absorb axial forces Hardened steel shaft Bearing flange with own oil circuit Longlife gear oil POM protection to reduce abrasion |
| Corrosion protection: | Housing made of GGG40 Primed and coated with 2K epoxy paint Agitator is galvanically isolated from the guide mast |
| Performance figures: | Thrust 3.1 kN Flow velocity*: 4.1 m/s Circulation capacity water: 81 m3/min Circulation capacity water: 4.860 m3/h |
| Weight: | 180 kg |
*measured in water and 1.2 m distance
