OPTIMIX 2G 90-280
The OPTIMIX 2G 90-280 submersible mixer impresses with a circulation capacity of 5,640 m3/h at a rated power of 9.0 kW.
An HD+ stainless steel agitator blade with a diameter of 800 mm provides 2.8 kN of thrust.
The three separate oil circuits for motor, gearbox and bearing housing ensure safe agitating operation.
The SUMA-4 roller guide with POM glide bars ensure that the agitator slides up and down the mast (100 x 100 mm) without any problems and also provides galvanic isolation from the guide mast.
The agitator is approved for use in explosion protection zone 2. The OPTIMIX 2G 90-280 is equipped with the proven POM protective clamp from SUMA, which reliably prevents abrasion caused by long-fibre materials on the agitator blade bushing.
Supplied without control/switch.
An HD+ stainless steel agitator blade with a diameter of 800 mm provides 2.8 kN of thrust.
The three separate oil circuits for motor, gearbox and bearing housing ensure safe agitating operation.
The SUMA-4 roller guide with POM glide bars ensure that the agitator slides up and down the mast (100 x 100 mm) without any problems and also provides galvanic isolation from the guide mast.
The agitator is approved for use in explosion protection zone 2. The OPTIMIX 2G 90-280 is equipped with the proven POM protective clamp from SUMA, which reliably prevents abrasion caused by long-fibre materials on the agitator blade bushing.
Supplied without control/switch.
| Application: |
Dry matter content up to 12 % |
| Motor: | Rated power: 15.0 kW Rated voltage: 400 V Rated current:17.7 A Frequency: 50 Hz Power factor cos φ: 0.83 Submersible motor IP 68, pressure-resistant 10 m PTC thermistor sensor as overheating protection Separate oil circuit, turbine oil |
| Gearbox: | Robust planetary gear Reduction i =5.25 / Agitator blade speed: 280 rpm Own oil circuit (1.0 ltr.), long-life gear oil Oil change interval after 10,000 operating hours |
| Cabel: | 10 m cable 7 x 4 + 4 x 1.5 mm2, Ø 20 mm Crimped cable entry Microbe-resistant Integrated cable strain relief 800 N Cable clamps & 10 m rope included |
| Explosion protection: | Approved for explosion protection zone 2 ATEX classification ce II 3G Ex ec h IIA T3 Gc |
| Propeller: | Three-bladed and balanced for smooth running Blade HD+ 800 in V2A Diameter of agitator blade: 800 mm |
| Guiding system:: | Motor mount with 4-roller guides for optimal gliding. For 100 x 100 mm masts, recommended max. mast height: 6 m |
| Bearing: | Bearing flange with mechanical seal SiC/SiC, max. level above agitator = 12 m, higher levels possible on request. 2 tapered roller bearings to absorb axial forces Hardened steel shaft Bearing flange with own oil circuit Longlife gear oil POM protection to reduce abrasion |
| Corrosion protection: | Housing made of GGG40 Primed and coated with 2K epoxy paint Agitator is galvanically isolated from the guide mast |
| Performance figures: | Thrust 2.8 kN Flow velocity*: 3.2 m/s Circulation capacity water: 94m3/min Circulation capacity water: 5,640 m3/h |
| Weight: | 159 kg |
*measured in water and 1.2 m distance
