OPTIMIX 2G 150-275
The OPTIMIX 2G 150-275 agitator has an output of 15 kW and a thrust force of 4.1 kN.
The high efficiency of the motor ensures energy-efficient operation. The submersible mixer is equipped with an HD+ stainless steel mixing blade with 850 mm and thus generates a high thrust force. A robust planetary gearbox ensures durability.
The OPTIMIX 2G 150-275 has a motor mount with 4-roller guide unit for 100 x 100 mm poles.
The agitator is approved for explosion protection zone 2.
The submersible mixer is equipped with SUMA's proven POM protection. This protects against long-fibre foreign substances and effectively prevents damage under the agitator blade bushing caused by abrasion.
The unit is supplied without control/switch.
The high efficiency of the motor ensures energy-efficient operation. The submersible mixer is equipped with an HD+ stainless steel mixing blade with 850 mm and thus generates a high thrust force. A robust planetary gearbox ensures durability.
The OPTIMIX 2G 150-275 has a motor mount with 4-roller guide unit for 100 x 100 mm poles.
The agitator is approved for explosion protection zone 2.
The submersible mixer is equipped with SUMA's proven POM protection. This protects against long-fibre foreign substances and effectively prevents damage under the agitator blade bushing caused by abrasion.
The unit is supplied without control/switch.
| Application: |
Dry matter content up to 12 |
| Motor: | Rated power: 15.0 kW Rated voltage: 400 V Rated current: 29.1 A Frequency: 50 Hz Power factor cos φ: 0.83 Submersible motor IP 68, pressure-resistant 10 m PTC thermistor sensor as overheating protection Separate oil circuit, turbine oil |
| Gearbox: | Robust planetary gear Reduction i = 5.33 / Agitator blade speed: 275 rpm Own oil circuit (1.5 ltr.), long-life gear oil Oil change interval after 8,000 operating hours |
| Cabel: | 10 m cable 7 x 4 + 4 x 1.5 mm2 , Ø 20 mm Crimped cable entry Microbe-resistant Integrated cable strain relief 800 N Cable clamps & 10 m rope included |
| Explosion protection: | Approved for explosion protection zone 2 ATEX classification ce II 3G Ex ec h IIA T3 Gc |
| Propeller: | Three-bladed and balanced for smooth running Blade HD+ 850 in V2A Diameter of agitator blade: 850 mm |
| Guiding system:: | Motor mount with 4-roller guides for optimal gliding. For 100 x 100 mm masts, max. mast height: 4 m. Stirring operation only possible in the upper and lower thirds of the mast. |
| Bearing: | Bearing flange with mechanical seal SiC/SiC, max. level above agitator = 12 m, higher levels possible on request. 2 tapered roller bearings to absorb axial forces Shaft Ø 45 mm Bearing flange with own oil circuit Longlife gear oil Oil change interval after 8,000 operating hours POM protection to reduce abrasion |
| Corrosion protection: | Housing made of GGG40 Primed and coated with 2K epoxy paint Agitator is galvanically isolated from the guide mast |
| Performance figures: | Thrust 4.1 kN Flow velocity*: 3.6 m/s Circulation capacity water: 94 m3/min Circulation capacity water: 5,640 m3/h |
| Weight: | 205 kg |
*measured in water and 1.2 m distance
