- Energy efficient motor with 15.0 - 22.0 kW power
- Vertical inclination from up to -2° to -30°
- Tube Ø 159 x 8 mm in ss304
- Installation up to 6 m below substrate level, other immersion depths on request
- Robust 2-staged planetary gear
- POM protection to minimize abrasion
Technical data
| GIANTMIX Type |
FX4 |
FX5 |
FX6 |
| Propeller speed [rpm] |
128 |
65 |
128 |
| Rated power [kW] |
15.0 |
18.5 |
22.0 |
| Axial force [kN] |
6.3 |
4.5 |
8.1 |
| Frequency [Hz] |
50 |
50 |
50 |
| Propeller [mm] |
1,200 |
1,600 |
1,300 |
| Ex-Zone |
2 |
2 |
2 |
Dimensions
| Type |
A [mm] |
B [m] |
C |
D [mm] |
E [mm] |
F [mm] |
G [mm] |
H [mm] |
I [mm] |
J [mm] |
| FX4 150-128 |
5,000 |
4.0 |
-2° to -30°/-20° |
862 |
3,180 |
Ø159 |
1,430 |
1,430 |
800 |
1,020 |
| FX5 185-65 |
5,100 |
4.0 |
-2° to -30°/-20° |
955 |
3,180 |
Ø159 |
1,730 |
1,430 |
800 |
1,460 |
| FX6 220-128 |
5,130 |
4.0 |
-2° to -30°/-20° |
990 |
3,180 |
Ø159 |
1,730 |
1,430 |
800 |
1,460 |
Further information
The FX long axis agitator easily handles substrates with a high solid content thanks to its remarkable thrust of up to 8.1 kN. The agitator can be used with dry matter contents of up to 15%.
The FX is available in various designs with rated outputs from 15 kW to 22.0 kW.
In addition to energy efficiency, the agitator was designed with a focus on maximum durability. Installation up to 6 m below the fill level is possible thanks to a sophisticated sealing system.
The long axis agitator is available in lengths of 4.0 meters. The vertical tilt adjustment of -2°/- 20° by means of an upper link or -2°/- 30° by means of a hydraulic cylinder leaves nothing to be desired in terms of flexibility in use.
SUMA uses the three-bladed HT blade for the agitator blade. With a speed of 128 rpm or 65 rpm, the FX is one of the slowest agitators in SUMA's wide product range.
POM protection and a scraper plate on the agitator blade bushing effectively protect the agitator blade from damage.
