- Ex-motors of rated output 11.0/15.0/18.5 kW at 200 - 400 rpm (3-phase 50 cycles)
- Tube Ø 101.6 mm, ss304 or ss316
- Suitable up to 1.5 m beneath substrate level. Higher immersion depths on request
- Authorized for ex-zone 1 within the tank and ex-zone 2 outside the tank
- ss304 version of tube and sealing plate, optional ss316
- Sealing through maintenance-free sealing membrane EPDM 60
- Inclination adjustment by upper control arm, toothed rack with winch or hydraulic drive
- Fast installation outside the tank - also afterwards
- POM protection to minimize abrasion
Technical data
Dimensions
| Type |
A [m] |
B [m] |
C [m] |
D
|
E [mm] |
F [m] |
G* |
| FR3/FR4/FR5 (400 rpm) |
3.5 / 4.5 |
2.9 / 3.9 |
0.98 |
30° |
Ø101.6 |
2.0 / 3.0 |
± 11° / ± 25° |
|
| FR3/FR4 (275 rpm) |
3.5 / 4.5 |
2.9 / 3.9 |
1.2 |
30° |
Ø101.6 |
2.0 / 3.0 |
± 11° / ± 25° |
* Vertical inclination ( ± 11°) through upper link or optional ± 25° through rack winch
Further information
Scope of application:
The GIANTMIX FR 30° is specially designed for fermenters and post-fermenters with an almost constant filling level and is used to optimise biological processes.
Easy maintenance:
The great advantage of the GIANTMIX FR is that almost all maintenance can be carried out from the outside. This means that it is not necessary to open the fermenter.
Optional tractor drive:
The GIANTMIX FR can be driven by a tractor with an optional protective device. All FR mixers are also available without a motor and only with a PTO connection as FR HY.
